About pavne_imran

pavne_imran · 08-10-2012

hi All,Need to understand the signifiniace of connecting PE to PE router and then to P router. Do i have to have all the PE LDP to only P router or i can have LDP neigbour with my PE device.PE 4 should have LDP with PE2 or directly to P1 router

pavne_imran · 06-30-2012

Using VPN client 5.0.7 Able to get vpn ip address But cant access remote desktop or any network insideI was able to access before But I dnt known what changes happen on my laptop which is unable to access now I have reinstall the client again but no ...

pavne_imran · 06-23-2012

Iam able to authenticate on VPN network with my username password & also able to get IP address from VPN pool But Not able to access any thing on my inside network (i.e lan ) or remote desktop on server 172.17.100.10 ,172.17.100.20 ip local pool Q8-V...

pavne_imran · 08-10-2012

thanks for replying but in the my case will there be any problem with label switching for PE4 router. Because i have another case where PE1 / PE2 /PE4 are same location and only PE1 and PE2 are directly connected to P router and PE4 will be connectin...

pavne_imran · 06-24-2012

Dear KarstenIf I work with standard I cant define portsBut for sake of argument I did your solution but it didnt worked Do u feel my nat statemnet is correct object network RA-VPN-HOSTsubnet 172.16.37.0 255.255.255.0!nat (inside,outside) source stati...

Member Since	‎06-15-2007 12:26 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

MPLS PE to PE conectivity

VPN Access Using VPN client 5.0.7

Remote Access VPN on ASA on IOS 8.4 (2)

MPLS PE to PE conectivity

Remote Access VPN on ASA on IOS 8.4 (2)