Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have reached the capacity of our FIB table on the 720B. This is due to taking multiple sets of routing information from our peers. At present I can only get 3-4 full routing tables loaded before the router runs out of ram. We also notie perf...
Hi,We are constructing a new network for our datacentres. We plan to have two peering points with the facilites being connected to each. Each peering router will run BGP and EIGRP. The datacentre routers will only run EIGRP. I plan to inject a de...
Hi,We have a pair of 7609 routers for core switches. Each access switch (2950T-48SI) has a connection to each 7609 using its gig ports. If I always want one 7609 to be the stp root and the other to be the stp root secondary would the following comm...
We are implementing a new datacentre and consilidating our networks. We plan to introduce EIGRP for routing within this facility and any other we add. We peer with the internet at various locations and obviously I dont want to push all the internet...
Hi Mark,Attached below is an excert from the eigrp top table. As you can see I have two routes for other routes distributed from the bgp routers. These are also redistributed statics so missing the the default distance doesnt seem to be preventing ...
Hi,That is exactly what I am trying to achieve. The problem is that default route wont load balance. The other routes coming from the BGP routers are in there twice for load sharing but not the default. See full ip route below from one of the dc r...
dc1Routing entry for 0.0.0.0/0, supernet Known via "eigrp 20", distance 170, metric 2816, candidate default path, type external Redistributing via eigrp 20 Last update from 10.1.64.32 on Vlan201, 4d22h ago Routing Descriptor Blocks: * 10.1.64.32...
Hi Vanesh,I am advertising aggregates /18, /20 and /19 to the internet. These are assigned to each dc, ie not overlapping, I want to drop announcments of each aggregate depending on network visibility.Martin has pretty much answered the question bel...
