Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
Im trying to do PBR to a non-directly connected equipment using recursive command. Would it support it even if my next hop is 4 hops away?
Im trying to push packets to an equipment 4 hops when going to a public IP, problem is im also getting that...
thanks rick, was doing some research on the background as well and i have considered your suggestion but it will be really messy. I dont want to set it up and forget to remove it and cause some issues in the future.
Will need to do more research on ...
sorry, i did a second look, i was wrong in saying static route would fix it.
i would suggest you connect SW2 to SW0 if you want to keep the management IP's.
If you want to manage it with the same setup/connections, you need to assign a new manageme...
some stuff i notice. first your default route is pointed to a admin down interface on router0 (gi0/0) Next, you are trying to manage the devices via VLAN99 but to what i see, they are on a different interface. If you need to manage them, you need to ...
have you tried to initialize the flash prior by using flash_init the following document may help you a lot http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/41845-192.html
