有如下拓扑：图片是随便找的，但是拓扑是一致的，FEX双上联至N5K，四个相同的MAC地址，从N5K-1可以看到接口下学习了四个MAC地址，从N5K-2上看到只学习到了两个MAC地址，另外两个MAC地址是从vpc peer-link学习到的，为什么会出现这种情况？检查了交换机配置，两边都是一样的N5K-1 查看MAC地址表 VLAN MAC Address Type age Secure NTFY Ports/SWID.SSID.LID---------+-----------------+---...
Hi, everybodyOur live network production has a Cisco 3945 router, the version is version 15.4, running NAT, now these NAT configurations, there are several NAT configurations are no longer needed, want to delete it;However, we tried to delete "no ip ...
Hello, thank you for your replyLater, I contacted TAC and judged that it was a bug, but because the version of the field device was old, we could not confirm the details. In short, after we re-configured the interface, the problem was solved, and now...
Hi，After the change operation, the static NAT configuration that I want to remove is not actually deleted. It still indicates that NAT configuration is in use. You may need to reclaim the corresponding NAT configuration after the device restarts late...
OKOK, maybe you can use the script directly and brush all the commands into the device at one time, the interval will be relatively short, so maybe you can quickly delete static NAT entries with session entries, thanks, I will try:)
Hi，MHMI checked the NAT translations status of the live network device today and found that the corresponding address and NAT session entries should be clarified directly instead of all session entries;In addition, only this egress on the device is s...
Hi，MHMI checked the NAT translations status of the live network device today and found that the corresponding address and NAT session entries should be clarified directly instead of all session entries;In addition, only this egress on the device is s...
