About luc_m

luc_m · 10-21-2003

hi,i need to know if DLSw "local-switching" is supported beetween 2 (or more) Ethernet interfaces on the same router.This is for resolve situation of stations on two differents VLANs and an as400 on another VLAN.Another possibility may be to have onl...

luc_m · 08-22-2003

Hi,I don't see clearly the distinction between :Access Mode VLAN: 2 (VLAN0002)andTrunking Native Mode VLAN : 5Is Access Mode VLAN used in case of trunked port ?what is interaction with native 802.1q Vlan port ?ThanksLuc MignereySwitch#sh interfaces f...

luc_m · 06-17-2003

Hi,for simplify the routing on my network, i need to know if using loopback address is really mandatory for DLSw ? In my configuration the routers are on stick (only one interface, ethernet) and the loopback address complexify my routing.Thanks for y...

luc_m · 06-17-2003

Hi,for simplify the routing on my network, i need to know if using loopback address is mandatory for DLSw ? In my configuration the router are on stick (only one interface, ethernet) and the loopback address complexify my routing.Thanks for your he...

luc_m · 10-28-2003

thanks for your help,i must evaluate another solution.Best regardsLuc Mignerey

luc_m · 10-28-2003

thanks for your help,i must evaluate another solution.Best regardsLuc Mignerey

luc_m · 10-25-2003

in this solution, the three VLANS will migrate to one bridged network ?the broadcast domain will merge the 3 Vlans with transparent bridging, isn't it ?Luc Mignerey

luc_m · 08-25-2003

Thnaks for your helpLuc Mignerey

luc_m · 06-18-2003

Thank for your help and also for the remark about traffic rate. It's not a concern in my configuration.Luc Mignerey

Member Since	‎04-30-2003 02:23 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	11

User Statistics

User Activity

dlsw local-switching between Ethernet interfaces on same router ?

802.1q on Catalyst : what about 'native VLAN port' and 'access port '?

Is loopback interface on router mandatory for DLSw ?

SNA DLSw and loopback address on router

Re: dlsw local-switching between Ethernet interfaces on same rou

Re: dlsw local-switching between Ethernet interfaces on same rou

Re: dlsw local-switching between Ethernet interfaces on same rou

Re: 802.1q on Catalyst : what about 'native VLAN port' and 'acce

Re: Is loopback interface on router mandatory for DLSw ?