Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Guys, New to stacking concept. Can we have 2 different versions/revisions running on the stack. 1 switch 15.0(2)SE62 switch 15.0(2)SE63 switch 15.0(2)SE4 (New switch to added to the existing 2 stack switch) Since the 3 rd switch has the defa...
Hello,I am a part of the project which involves restructuring IP address for the entire company as this will lessen the issues we are currently facing. No summarization, harpazard ip addressing scheme, complicated access-list and difficult to identif...
Hello Guys, I am trying to access a site from CompanyThis is what the access-list on my ASA pertaining to that site I am trying to access.access-list Inside_access_in extended permit ip any host xxx.xxx.132.23access-group Inside_access_in in interfac...
Hi Guys,I am facing the situation where I am able to traceroute from server to remote sites and I can see the path taken for troubleshooting purpose. But when i do traceroute from core switches(7ks), traceroute does gets lost in the mpls SP network. ...
Guys I am designing the firewall solution. I have 2 ASA with 2 Switches. Please see the diagram design1 and design2. Let me know your thoughts. Design 1 uses a stacking cable with 2 switches but in a diagram it is represented as one due to lack of di...
Thanks for the Immediate response.I am assuming that I can take off the flex stack cables while the stack is operational and plug it back to the new device.
I was able to upgrade to 15.0(2)SE6 as suggested by you using xmodem.I have one more question.Does the entire stack needs to be rebooted which adding a new switch to the stack. ?I would need to connect the stack cables when the new switch is powered...
Thanks for providing the valuable information. Will keep these in mind when implementing.My manager wants me to come up with configuration on the switches and routers with new IP addressing in place without disrupting the existing ones as no one want...
I can give you remote access to this device look into what is the issue as I can't post the config as it has 1000 lines of config and lots of work needs to be done.
