Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,It's possible to have counters for VLANs without rebooting the switch? SoftwareBIOS: version 05.51 [last: 05.28]NXOS: version 9.3(13)BIOS compile time: 11/29/2023 [last: 01/18/2018]NXOS image file is: bootflash:///nxos.9.3.13.binNXOS compile t...
Hello,It does not work for us.#sh interface vlan 16Vlan16 is up, line protocol is up, autostate enabledHardware is EtherSVI, address is 4c77.6dfb.e461Description: --------------Internet Address is 10.0.2.57/30MTU 1500 bytes, BW 10000000 Kbit, DLY 10 ...
All good now.Metro.1.New(config-if)# switchport ?<CR>access Set access mode characteristics of the interfaceautostate Include or exclude this port from vlan link up calculationblock Block specified outbound traffic for all VLANsdot1q Configure dot1q ...
