About kakathieuja

kakathieuja · ‎06-08-2016

Hi Lynden, It was SNTC-CSPC2.5.2.1-OVF10.ova Thanks, Trung

kakathieuja · ‎06-07-2016

Hi Lynden, I use VMware vSphere Client connect to the server. Then I console to it. i log in by admin (with admin default password). But i cant config /etc/sysconfig/network-scripts Thanks, Trung

kakathieuja · ‎06-06-2016

Hi Lynden, Thanks for your answer. I created 2 logical interface with vlan 635 and 636, but when i console in server, show ip cant show 2 logical interface i had created so i cant set ip. i cant type conf ip eth0.635 192.168.1.100 255.255.255.0 192.168.1.1 What i need to do now? Thanks Trung.

kakathieuja · ‎06-06-2016

Hi Lynden, This is a physical UCS server with 2 physical NIC and i run Esxi5.0 on it. But i have to set 3 different ip in different subnet in 3 interface. I think that i need to config 2 logical interface on 1 physical NIC and set ip in them, and set vlan etc. But i dont know how to do this :( Do your have any suggestion? Thanks, Trung.

kakathieuja · ‎06-03-2016

Hi Lynden, Thanks for your answer, But in this CSPC i have only 2 physical NIC, so i have to create 2 logical interface and add them to 1 physical interface to set IP and collect information from 3 interface/IP . Do you have any suggestion ? Thanks so much. Trung,

kakathieuja · ‎05-31-2016

Hi all, I am a newbie at Linux, i dont have any experience in CSPC. At the moment, i have 2 physical NIC on CSPC server. But our topo need to set 3 difference subnet IP on 3 interfaces. But i only have 2 physical. What i need to config on CSPC server and in my router/switch. Example : I need to set IP 192.168.0.1/30 in NIC 1 192.168.100.20/28 in NIC 2 One IP for internet Thanks

kakathieuja · ‎04-03-2016

Hi Jarrett, Thanks

kakathieuja · ‎04-01-2016

Thanks for your support. Wait, it is an april lies, right? Anyway, thank you so much.

kakathieuja · ‎04-01-2016

Hi Jarrett, Our customer use a local Ip address of a NTP server and when i config timesync to it, the CSPC server timesync is in the attached image, and i reboot the CSPC server. Then i test upload job again and it was success immediately. Then i connect to SNTC but not thing happen. Maybe i need to wait 24 hours. But at least some guide said that a upload profile will show how many time it need to be done, that right? Can you give some suggest? Thanks

kakathieuja · ‎03-30-2016

Hi Jarrett, This is my timesync and timezone It was not configured. I will try to config it and feedback. Can you give me a guide? Thanks

kakathieuja · ‎03-30-2016

Hi Jarrett, Yes, i already run Collection Profile and it has completed. After i run an Upload Job the result is in the upload profile.jpg, Thanks

kakathieuja · ‎03-29-2016

Hi, If you need any information please ask me or send me a message. Anyway, thanks for your help Thanks

kakathieuja · ‎03-28-2016

Please talk the next action because i try 2 times and nothing happen. the 1st time is 6 March and the second time is 20 March :(. Thanks

kakathieuja · ‎03-28-2016

Hi Pamela, sorry but it isnot my problem. It is i cant see all information about my smart net total care. Please see my attached image. This is not have anything in dashboard, administrator and action etc. But thanks for your answer.

kakathieuja · ‎03-28-2016

My Smart Net total care displays like this when i connect to https://tools.cisco.com/smartservices/ . I cant receive the upload information from my CSPC server even when no failed log in the CSPC server. What is my problem? How can i check this ? Thanks all

kakathieuja · 06-08-2016

Hi Lynden, It was SNTC-CSPC2.5.2.1-OVF10.ova Thanks, Trung

kakathieuja · 06-07-2016

Hi Lynden, I use VMware vSphere Client connect to the server. Then I console to it. i log in by admi...

kakathieuja · 06-06-2016

Hi Lynden, Thanks for your answer. I created 2 logical interface with vlan 635 and 636, but when i c...

kakathieuja · 06-06-2016

Hi Lynden, This is a physical UCS server with 2 physical NIC and i run Esxi5.0 on it. But i have to ...

kakathieuja · 06-03-2016

Hi Lynden, Thanks for your answer, But in this CSPC i have only 2 physical NIC, so i have to create ...

kakathieuja · 05-31-2016

Hi all, I am a newbie at Linux, i dont have any experience in CSPC. At the moment, i have 2 physical...

kakathieuja · 04-03-2016

Hi Jarrett, Thanks

kakathieuja · 04-01-2016

Thanks for your support. Wait, it is an april lies, right? Anyway, thank you so much.

kakathieuja · 04-01-2016

Hi Jarrett, Our customer use a local Ip address of a NTP server and when i config timesync to it, th...

kakathieuja · 03-30-2016

Hi Jarrett, This is my timesync and timezone It was not configured. I will try to config it and feed...

kakathieuja · 03-30-2016

Hi Jarrett, Yes, i already run Collection Profile and it has completed. After i run an Upload Job th...

kakathieuja · 03-29-2016

Hi, If you need any information please ask me or send me a message. Anyway, thanks for your help Tha...

kakathieuja · 03-28-2016

Please talk the next action because i try 2 times and nothing happen. the 1st time is 6 March and th...

kakathieuja · 03-28-2016

Hi Pamela, sorry but it isnot my problem. It is i cant see all information about my smart net total ...

kakathieuja · 03-28-2016

My Smart Net total care displays like this when i connect to https://tools.cisco.com/smartservices/ ...

Date Registered	‎10-07-2015 07:06 PM
Date Last Visited	‎08-18-2017 03:54 AM
Total Messages Posted	17

Hi Lynden,

Hi Lynden,

Hi Lynden,

Hi Lynden,

Hi Lynden,

CSPC server problem

Hi Jarrett,

Thanks for your support.

Hi Jarrett,

Hi Jarrett,

Hi Jarrett,

Hi,

Please talk the next action

Hi Pamela,

SNTC problem

Hi Lynden,

Hi Lynden,

Hi Lynden,

Hi Lynden,

Hi Lynden,

CSPC server problem

Hi Jarrett,

Thanks for your support.

Hi Jarrett,

Hi Jarrett,

Hi Jarrett,

Hi,

Please talk the next action

Hi Pamela,

SNTC problem