Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 2 - 1410 bridges ( point to point) between two buildings approx 600' apart. They seem to be aligned well ( Signal -52dBm, SNR 41 ) and have been very reliable. However, I cannot seem to run more than 26Mbps thru them.Can the distance command...
I have 2 Nexus 7k in our data center 2 - vPC peerlinks ( one on module 1 and the second on module 2)1 - peer keepalive ( layer 3 on moduel 3)45 vPCssupporting about 50 "top of rack" switches ( 4948s and nexus 22xx ) Nexus 1 role is primary Nexus 2 ro...
We are deploying a large number of IV pumps with internal wireless NICs( dlink)Clients can successfuly authenticate...then re-authenticate every few seconds..controller code 6.0.188ACS version 4.2authenticating to microsoft ADClients are configured...
Yes, that process definitely works...I used that to complete the upgrade. when manually initating the switch 1-2 pings are all that drops.the bigger issue is, if the primary vPC Nexus (1) box were ever to fail, the secondary vPC Nexus (2) does not a...
1 -2 pings being dropped is what I expected too... as soon as the keepalive timeout was reached, I expected Nexus 2 to pick up control of the vPCs.... it didn't. ??????????yes, the vPC peer link consists of 2 individual ports eth1/1 and eth10/1 in ...
