Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to configure static PAT for a Linux SSH server on my network. The tricky part is that I'm trying to map port 21 from the outside to port 22 on the inside (because port 22 is blocked on my work network).I've tried the following but it does...
Hi all,I'm working on a little OSPF setup in my lab and having a problem pinging out to the internet...I have a setup with (3) 3550's running ip routing. I'm configuring OSPF but I can't ping the internet from any L3 switch except the switch with the...
I have 2 office buildings using Cisco 800 series routers with a L2L VPN between both. I'm upgrading the router to an ASA5505 at one of the offices but can't figure out the L2L VPN on the ASA. Specifically, can't figure out how to set the pre-shared...
Im looking for advice on upgrading our small office network. We currently have about 75 employees with probably 125 devices on the network. I'd like to create about 10 vlans for the different departments and then configure intervlan routing as needed...
From what I've read, what I would like to accomplish isn't possible. We have 5 static IPs. 4 for servers and 1 for the firewall. I can ping the firewall fine from the outside but can't ping the other 4 IPs. Doesn't sound like its possible to configur...
Thanks for the reply. Why would I need to advertise my 192.168.1.0/24 network? That is technically the "WAN" isn't it? If these 3550's were routers, SW1 would have the connection to the ISP (192.168.1.90) and all the other routers would go through...
Thanks for all the help! That makes more sense now. I'll be attempting to implement this tomorrow night. Just want to make sure everything is lined up. Here is my "final" config... anything you notice that should be added/changed (obviously it's ...
Thanks again. One more question... I already have a crypto map on that interface for my RA ipsec VPN (Cisco VPN Client). Can I also apply this one or do I need to edit the existing one? If I need to edit it, what needs to be changed?Here is my cur...
