I am unable to SSH into the devices in the TRex sandbox.
I am VPN'd into the sandbox. The web SSH option errors out.
Using putty to SSH into the device refuses connection.
There are only two devices in the sandbox and both of them do not work....
Hi,
Thanks for finding this. The problem isn't configuring the TRex box. The issue is getting access to the device to configure the application. SSH access is not working in the sandbox.
You have to understand call legs. Every call to a gateway has two call legs, an inbound and outbound.If you don't have an inbound dial-peer to control your inbound call leg then the gateway will use the default dial-peer or dial-peer zero. You can'...
Chad,You beat me to it.I'd also add your voice-class codec 1 and no vad to the inbound voip dial-peer unless you want to use the default g.729 with vad enabled.You might also need to change the inbound voip dial-peers protocol to SIP.Jason
The problem is the proxy port on line one.The SIP INVITE is being sent to port 5060, the default SIP port number.Via: SIP/2.0/UDP 69.59.142.213:5060Contact: <69.59.142.213:5060></69.59.142.213:5060>Notice what port calls are being sent to on line two...