Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Yes, what you stated makes perfect sense so I decided to change the Cisco 1131AG ssid 1 name to the same as the Cisco 1230AG to make the transition easier on the client adapter when the signal quality decreases. I do believe this has solved my proble...
Yes, I see the problem, but I thought the Cisco Aironet utility would be able to switch to ssid2: EXAMPLE2, if it loses the signal from ssid1: example1.
Cisco 1240 AG configuration!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ITCenter
!
!
ip subnet-zero
!
!
aaa new-model
!
!
aaa group server radius rad_...
I was able to re configure the 1240AG and 1131AG access point in personal mode with WPA, but the client configuration utility refuses to work if I add another name in SSID 2. Any other suggestions?
