Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hai guys,We have an issue with RME report generator.Currently we are using LMS 3.2 installed on VMware esxi5 and RME version 4.3.2.Every things are working fine except RME reports and RME job browser.We we try to geneate report we get an error.Below ...
Hello ,In our company we are using Ciscoworks LMS3.0.( DFM 3.0.1, RME 4.1.1.)In DFM, every day at 8:00 PM we recevie alarm authorization failure on Core switch ( source is cisco works server IP).All credentials of Core switches are ok .I have checked...
Dear all,We are facing problem with one of switch port.Our Server is directly connected to switch port 0/30 ,after couple of hours we found input & CRC errors on the interface and port goes down and restart automatically.We have cleared the counters ...
Dear all,We are using Ciscoworks lms 3.1 in our network.IN DFM high severity , Unidentified error is displayed . If i click the device name , it is giving error." Unable to retrieve detailed device view for unidentified trap.This device no longer ex...
Dear All,IN our network we are having access switches , core switch 6500, ips and Fwsm .When i ping to other vlan ip other device , i am getting drops . For 4000 sent packets 75 pkts are lost.I check the configurations on devices ,trunks, speed ,acce...
Guys,Any solution to this issue is highly appreciated or i would e better to opne case with TAC.Need your kind consideration on this disussion.Thanks in advance.BR,M.K
Dear clark,Thanks for your support. I have find out the JOB ID in ciscoworks which runs at 8:00 pm. JOB ID: 1510 – Device discovery I have exlcuded many devices which are not needed in device discovery filter setting.how to troubleshooting for authe...
Dear clarke,Thanks for prompt response.i have small query ,since the credentials of core switches are ok on Common servers . why there is authorization failure?Is there any other way wher i can find all the all porcess running at 8:00 pm and delete ...
Hai,You need to assign SNMP comunity string on routers and swiches which your going to addd in LMS 3.2.Be care with Read only and read write community string .Read only to only fetch config, view device details.Read write to change configuration on r...
