Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Trying to create an appelate (actually I did create one but it only works on 3.0) or a TCL script (actually trying to study it now)for a BGP hit. Currently have 12.4(8) which only supports 2.1 which is a problem. I figured I could do the same ...
Hey Guys,Am in a quandry. A client is using ICMP to generate traffic. IE 6000bytes corresponding to 64k and down the line. This is fine on a terrestrial link (can go upto max 16000 bytes with no loss). Unfortunately we have VPN circuits using ADSL li...
Hi JC,was reading through this and have a need for a similar config so was thinking I could take this and revamp mine. My question is you are bringing up a EIGRP_Watchdog appelate but there is none defined. not sure how its supposed to work.
Yes I was, and the appelate is named but missing in the one I sent you, my bad. it was to remove fast peering one minute before it comes back up (after the 60 minutes) else if it takes another hit the fast peering would reactivate and my 60 minutes o...
Wow that was fast! Thanks,here goes, got a few error msgs though when i ran on a 12.4(22) EEM 3.And tried it with Fast peering which is again not supported on 12.4(8)..by the way EEM 2.2 is supported and I mentioned 2.1
Ced,Swaroop is right. If this traverses the MPLS clould and you are using a provider (can only speak to this) you would have the provider perform the mappings between the PE and the Core ie he would take your dscp values and mark it to the EXP bits. ...
