About blair-keeley

blair-keeley · 03-07-2024

Hi,I have configured an SBC as a managed on-premise trunk. Everything works perfectly except calling inbound to Webex extensions. There are some Webex users that have extension numbers only, the SBC has another PBX connected and the idea is those PBX...

blair-keeley · 07-24-2024

Yes, so that is the scenario where the call has been forwarded or blind transferred by the system on the opposite side of the trunk to Webex.ie A user on a PBX has a PSTN call and blind transfers across the calling trunk to a Webex user, the From wil...

blair-keeley · 07-24-2024

My final findings on this were.If the calling number in the From or Diversion header is less than 6 digits the call was allowed.If the calling number in the From or Diversion header matches the trunk dial plan the call was allowed.Makes sense and all...

blair-keeley · 03-10-2024

I have found some info in documents, looks like the from component for the invite to WxC should match the dial plan configured to call the other PBX and then the call will be seen as a same premise call and not receive 604. I was sending long number ...

blair-keeley · 03-07-2024

Thankyou @Vaijanath Sonvane for the response.This is a lab setup with an AudioCodes SBC and a FreeSWITCH instance as the other PBX side of the SBC.Outbound 78xxx to FreeSWITCH (working)Example WebEx user has phone number and extension, this user is i...

Member Since	‎03-07-2024 11:33 AM
Date Last Visited	‎08-22-2024 01:30 PM
Posts	5
Total Helpful Votes Received	1

User Statistics

User Activity

Webex Calling - Inbound calling - On-premise trunk to Webex extension

Re: Webex Calling - Inbound calling - On-premise trunk to Webex extens

Re: Webex Calling - Inbound calling - On-premise trunk to Webex extens

Re: Webex Calling - Inbound calling - On-premise trunk to Webex extens

Re: Webex Calling - Inbound calling - On-premise trunk to Webex extens