Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm looking for some advice. We need to move some LAP's from one controller to another. There are 2 problems, one is that the LAP's are all in different locations around the country so we cant really get console access and the second is that the o...
HiI would like some help with the following on a PIX.Currently we have the following -name 10.2.1.10 XSERVER static (inside,outside) 192.168.3.1 XSERVER netmask 255.255.255.255access-list inside_access_in extended permit tcp host XSERVER eq smtp any ...
Hi,We are trying to get the following working.We have a 4402 setup with a guest wlan. Layer 3 security is set to "web Policy" and "passthrough" - email input is unchecked.Under the securiy tab the web loginpage is set to "external (redirect to an ext...
Is there any way to dynamically assign a vlan when a guest user associates with an AP.Using Wireless lan controller.I understand this is possible using ACS to assign the vlan dynamically but that requires a username and password to be input.What I ha...
That doesnt seem to work with telnet, because the ap's are still connected to the controller they get "ERROR!!! Command is disabled". And through the GUI I think it has to be the controller by name when they are in the same mobility group.
Yeah that one thing I was considering, change the DNS entry and issue clear ap-config They said they had they had tried this when I last spoke to them but I doubt it !
No its no the case, you can have several vlans going over one SSID.Just create sub interfaces on the Dot1radio interface and Ethernet interface.like this (this will pass the native vlan and vlan 2 and 3 ) -interface Dot11Radio0.1 encapsulation dot1Q ...
Thanks Aaron.Its not quite what we are looking for though.We want each guest user to be put into their own seperate vlan, the first user would go in vlan11, user 2 would go in vlan12, user 3 would go in vlan 13 etc etc
