Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,We have configured a DMVPN from our headquarter to our branch offices (let's say BR1-BR3) .We have noticed that sometime we cannot access some of our branch office, the scenario is like this:- sometime, BR1 and BR2 are down but BR3 is working ...
Hello,Our internet connection is connected to an ASA. The download speed is ok but the upload is very slow.we have been running some speed test from our LAN, and have been also trying to upload/download file.Our ASA also have the IPS module. I turned...
Hi all,we plan to use ACS 5.3 for remote vpn user authorization.we have found a document on to how to do this, but they use ASA 8.3.we would like to know if it is supported on ASA 8.2 or do we need to upgrade the ASA IOS.
Hi all,From our headquarter, we use a vpn site-to-site to connect to another site and it works fine.we have just configured VPN client on our headquarter, remote VPN user can access the LAN in headquarter.We need that remote user can also access the ...
Hello,We plan to use nessus plugins with cisco nac. For some users, the computer should have any antivirus installed and updated before it can access network.For other users, the computer should have mcafee antivirus installed and updated.we tried to...
Hi Portu,please, find below the answer:Are you able to ping from tunnel interface to tunnel interface?yes, we are able to ping tunnel interface to tunnel interfaceDoes the IPsec tunnel come down (show crypto isakmp sa)?no, we see the status is ACTIVE...
Hi Julio,Thanks for your reply. Unfortunately, the connection is used all the time and we cannot unplug it. What we did was, we pluggled a single pc to a dmz, but the LAN is also connected to the inside, and we got the same result.we will do the test...
Hi Julio,The duplex and speed were changed, we hardcoded it to full/100Mbps.The upload speed is higher (now : 300KBps - before : 50KBps) , it should be 8Mbps (download and upload).When sending only one file, the max speed we can get is 300KBps.We c...
Hi Julio,We have removed the class-map for IPS and have done a clear local-host.We have also changed the duplex (from Auto to full) and speed (from Auto to 100Mbps) on the outside interface.it seemed the duplex we 've got was half when it was configu...
Hi,it seems it doen't take too much time takes for the asa to receive the packet on one interface and send it on the other interface. the bypass mode on the IPS is enabled.what would you suggest us to check next?
