Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, desperately need help from all the smart people. I am upgrading my routers and am stumped as to why these strange tones are coming through my T1 Test set. I have tested a few configurations between my Cisco 3925s, 2900s and 8300s and the sym...
Just received some 8300s and am attempting on configuring the dial-peers and voice-ports and am not having any luck. I must be missing a step pror to being able to configure these. I have a config from my 3925E's that I am trying to duplicate. I u...
just to make things interesting, here are the running configs from the old routers. As a reminder, any combination of introducing one of the old routers works with the new router. I tested all day yesterday trying different things within the voice-...
configs attached. on the "central" config, I am testing primarily voice-port 0/1/0:2. I am testing in my lab and am building up the configs so it may look a bit messy currently but the voice portion of the configs should be gtg. really confused as...
Sorry it took so long to get back on this subject, I have been gone on a work trip for a while. I was able to apply the information you provided and that resolved my issues. thank you so much.
sure. I have tried to copy the configurations from my existing 3925E configs, for example, one of my configs looks like this:dial-peer voice 101 potsdestination-pattern 4101port 0/1/0:0When in Conf T, I attempt to enter: dial-peer voice 101 pots, an...
