At one of our Locations, we're going to have two PPP Leased Lines for internet purposes, 2Mbps each. Can we do some config in the router to make this 2 + 2 leased line, a 4Mbps leased line. i.e. can we get 4 Mbps on the lan port of the router. If yes...
Given a scenario where in an L3 switch i have 8 ports. I want to make all the ports to be in an different Vlan. Now I have port number 1 as the main port or the port with which all the ports should communicate i.e. trunk port. My question is, Is ther...
Hi,I am facing an acute problem. I've a cisco 3725 series router in which I've got 8 serial interfaces, out of which 6 are active and one is shut. The problem is, when i ping any of the local serial interfaces, I.e. whenever i ping any ip assigned on...
Thanks, But this config is already persisting. The config is done in such a manner that since there are 2 Lan Ports and 2 Wan ports, the traffic of one lan port's subnet goes towards one wan subnet and other lan port's subnet to the other wan IP. Bot...
Thanks for reply Mohammed. But Kindly explain what policy based routing can be applied if the links are used for Browsing and such basic purposes only..Thanks... Tapas
The " Show ip cac flow" gives the current trafic flow from the router.. this command shows the details such as the Src IP, Dest IP, Src Port, Dest Port, Packet count.. Etc. But to use this command you need to enable the cac flow.Tapas
