Hi there,
I've following BGP setup:
AS A PE1 - - - - - - PE2
| |
| |
AS B CE1 ---------- CE2
I run bgp, eBGP between CE1/CE2 and PE1/PE2 and iBGP between CE...
PEs are the same AS.
on the CE1/CE2 I'm doing VRRP for L3 HA and vPC for L2 HA (simple setup to avoid complexity)
I guess I figured out the reason: from PEs I'm getting the default route only (not the full table): in case of EIBGP multipath I would g...
