About Syedalishah

Syedalishah · 03-29-2024

Hi Community,I want to configure PBR for LAN subnet as when any of the user initiate the traffic for server packet should go to the ISP-2e.g 192.168.40.20 destined to 192.168.16.55 it should follow the ISP-2 reaming traffic should follow ISP-1I have ...

Syedalishah · 03-22-2024

HI Community,I need assistance and guidance from my seniors that how should I configured HSRP between below scenarios.

Syedalishah · 04-02-2024

Hi MHM,Not yet my traffic is still going from ISP-1 when Iam taking traceroute.But I can see some traffic matches the ACL. I have on debugging but won'tsee any log.

Syedalishah · 03-29-2024

Now it's UPbut traffic going from ISP-1Type escape sequence to abort.Tracing the route to 192.168.16.55VRF info: (vrf in name/id, vrf out name/id)1 172.16.1.69 20 msec 20 msec 16 msec2 192.168.3.17 20 msec 20 msec 20 msec

Syedalishah · 03-29-2024

I have specified the source interface as well but still status is down.Set clauses:ip next-hop verify-availability 172.16.3.69 1 track 1 [down]Policy routing matches: 672 packets, 97240 bytestrack 1 ip sla 1 reachabilityip sla 1icmp-echo 172.16.3.69 ...

Syedalishah · 03-29-2024

The next hop is pingable why it showing me down?Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 172.16.3.69, timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 20/20/24 ms

Syedalishah · 03-29-2024

yes configured but still showing me in down state

Member Since	‎03-22-2024 01:08 PM
Date Last Visited	‎04-03-2024 12:05 AM
Posts	19
Total Helpful Votes Received	1

User Statistics

User Activity

PBR not working while using Eigrp

HSRP configaurtion between Nexus and Aggregation

Re: PBR not working while using Eigrp

Re: PBR not working while using Eigrp

Re: PBR not working while using Eigrp

Re: PBR not working while using Eigrp

Re: PBR not working while using Eigrp