About John Saldana

John Saldana · 11-26-2015

I'm trying to build a tunnel accross the internet and seem to be having an issue with actually being able to ping accross the tunnel. Router 1 is a terrestrial link; Router 2 is a satlink with ping times avg'ing 600ms. Both routers are able to ping e...

John Saldana · 11-27-2015

Paul, I couldn't agree more, this is a basic GRE Tunnel.. I have done this before, its just interesting that I do the same thing this time and it doesnt work.. very interesting! Richard & Paul, I have posted the full configs below. Also, I dont think...

John Saldana · 11-27-2015

Paul, No firewall and yes both routers can ping each other with no probs.

John Saldana · 11-27-2015

Made the changes, still not able to ping across the tunnel. ============================================================== Router 1 = 1.1.1.1interface Tunnel0 bandwidth 1024 ip address 172.0.0.1 255.255.255.252 ip mtu 1400 ip tcp adjust-mss 1360 keep...

John Saldana · 05-21-2015

Hello,I would have to say the best practice is statically set the IP Address on the device, just be sure to make some notes on the statically assigned devices. The other way would be to statically assign an IP Address to a MAC Address by implementing...

Member Since	‎05-18-2015 08:22 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	8

User Statistics

User Activity

Issue Building an IP GRE Tunnel

Paul,

Paul,

Made the changes, still not

Hello,I would have to say the