Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
As you already have the tar file, and can log in to your AP and copy via a tftp server, i would suggest using the archive command to upgrade you AP via tftp rather than copying it to the AP then upgrading it.archive download-sw /overwrite tftp://x.x....
The answers in your post ;0)Directory of flash:/ 2 -rwx 7140535 Feb 28 1993 22:18:49 -05:00 c3750-ipbasek9-mz.122-25.SEE.bin 3 -rwx 796 Nov 3 2006 13:19:56 -05:00 vlan.dat 4 -rwx 34436 Nov 11 2006 19:09:06 -05:00 config.text 5 drwx 192 Feb 28 1993 19...
Hi, Holding the MODE button down on a reboot resets the AP to factory defaults.If held for 20 to 30 secs it takes you into the Automatic IOS recovery routine for putting a new IOS image on a AP after a fail. (If held for 20-30 Seconds and middle ambe...
Hi,If you need to restore an image, here is a tried and tested solutionStep 1Rename the image file for the AP with the extension .default (i.e. rename c1200-k9w7-tar.123-7.JA2.tar to c1200-k9w7-tar.default) Place this file in the root of your tftp se...
