Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm setting up my ACS server using MAC address to authenticate. I've over 1500 MAC addresses thus is there any way to mass import the MAC addresses into the ACS?With regards
Hi,Recently I encountered a problem on "line protocol down" as I'd posted on 4th April. Could anyone direct me to any webpage or sites where there's a detail explaination of how & what would trigger a line protocol down. Or these kinda data-link fail...
I've a rather simple but puzzled problem. I've a setup of CISCO 2955, linking up to a media converter (UTP to fiber) then to remote end another media converter UTP link directly to a PC.With this setup, I received Line Protocol down. I understand tha...
Hi Nathana,thanks for your reply. Does this method works for ACS ver 4.0?I did manage to find some steps but have yet to confirm its credibility.Thanks!
Hi,thanks for the reply.I've resolved the problem by fixing the duplex & speed for the switch port & the remote PC NIC. (Although my previous setup that work for other sites are all in auto / hardware default settings)I would like to know of any expl...
Hi Balaji,I'd already tried connecting my workable notebook to the remote end, inclusive of my customer's notebook. All giving the same result.That's why it puzzles me to this extend =(
Hi Pkhatri & Bhedlund,thanks for your replies.I've setup this configuration for a few sites over at my customer LAN.I've tested the CISCO 2955 switch to be working for all ports. Media-converters connection down to end station connection, the fiber &...
As I've mention in the beginning. Physical layer is & confirmed in working order.I've also verified that the pair of media-converters that I'm using are in good condition.With that, comes data-link layer that fails. It seems that the only difference ...
