Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Anyone able to help with this one?2 access switches 3750 and 2960 have resilient connections to 6500 distribution switches. Clients on each access switch download a 15MB file from a server in the server farm. Client on 2960 takes 8minutes, Client o...
We had a change on the mst 0 priority and subsequently had vrf's failover to the redundant device, however the vrf's failed back within minutes. Now none of these vrf's vlans are in mst 0 so i am a bit baffled that they were impacted.Can anyone expla...
I have 2 clients that A and B. A sends periodic updates to B however B does not receive all updates, I have ruled out routing as some updates are being received and no change of configuration has occured. client A is on a 10 half duplex interface, ...
I have an issue with one of my remote switches where i am unable to telnet. My onsite engineer informs me there are no active vty sessions, I don't even get a username prompt before the window closes. I have removed the ACL on the vty line so see no...
We are just using transfer to simulate conversation between the endpoints as the client authenticate and talk to the server through the transaction. We bypassed the network and placed a test pc on the same switch as the server and got the same result...
Thanks guys, I was kind of hoping the messages would be TCP and therefore retransmit, but I'll change the duplex settings and see if this makes a difference.Regards
