Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,High response time due to may resons, like congestion, you can monitor the rate on the link to identify the cause of the problemmay be also due to layer 1 problem.Thanks,Ahmed Hussein
Hello,It's better to modify the configuration as below class-map match-all priority-in match access-group name priority class-map match-all priority-outmach ip precedence 1class-map set ip precedence 0 Policy-map inboundclass priority-in set ip prece...
Hello,Actually the router understand layer 4 parameters like port numbers, but we call it layer 3 because its routing decision based on ip (layer 3), like switches we call it layer 2 devices because the switching decision based on layer 2 information...
Hello Yogesh, I think this design can be implemented with loadsharing by dvide every VLAN update to be sent over one router normally & prepend the AS on the other router (This is for return traffic), but for outgoing traffic you can implement 2 HSRP ...
