Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have two 2800 series routers on the same LAN configured with HSRP.I have configured the primary router as dhcp server :ip dhcp pool pool1 network 10.10.10.1 255.255.255.192 dns-server 212.89.10.45 domain-name study.co.dr default-router 10.1...
I bought a c827 from ebay and I have no guaranty from the seller.Router is running fine but after about 30 minutes. It just loose power.I have to wait few minutes. Then I can switch it on.and again after few minute router loose power....The power s...
Hi,I config my PE and CE as usual.My PE config :interface Serial1/0.1 point-to-point description VPNv4 Connection bandwidth 16 ip vrf forwarding vpn_1 ip address a.a.a.253 255.255.255.252 frame-relay interface-dlci 122 IETF class ce_vpn_1As far as...
We are an isp and offering connection to 1 of our customers between israel and us.customer complain that when he do a file transfer from isreal to us he is gettting only 0% of port speed wich is 512k.whe he is testing from us to isreal he gets 100%.I...
Hello,It will be difficult to help with only the router config.Without your network topology and some further troubleshooting output I don't see how we can progress.what happen if you shutdown new link?Do you see anything strange is router log?Is the...
I see this not possible without manupulation of the outgoing traffic.Do you have bgp table from both ISP's ?If yes, you will need to do some policy routing to state that you will prefer ISP_A to reach that all internet (as it is 5 Mbit) and prefer IS...
hello,try this link, very helpfull with details.http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a00802a1b9c.html#wp1027188HTH,cisand
Hi,Agree with Rick. You need to filter interesting from non interesting traffic. In your config all ip traffic will keep you connection up (broadcast, mutilcast.. routing protocols..)I will suggest to start bu adding this:access-list 120 deny ip...
Hi,Agree with Rick. You need to filter interesting from non interesting traffic. In your config all ip traffic will keep you connection up (broadcast, mutilcast.. routing protocols..)I will suggest to start bu adding this:access-list 120 deny ip...
