Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have a strange problem using a ccme versione 4.1(0) on a router 2800 IOS: c2800nm-advipservicesk9-mz.124-15.T5The CCME is correctly registered on a sip provider.Some times when I have an incoming call i have the Ring "Free" but after 3 ring ...
Hi,I have a metwork with 35 AP 1242 (only 2.4ghz band) and 30 7921g.I'm using a WLC 4404 version 4.2.61 7921G version 1.1.1, CCME version 4.1, AP IOS 123-7JX.The coverage seems to be good and also the overlap.The problem is: some times casually and a...
Hi,I have a problem with sip incoming calls: the incoming call arrive to a 7931 IP phone, If i set a Forward no answer to another phone the call fail.If I set an Hutgrout with the same phones the calls work well.I need to route the incoming call to a...
Hi, I add a new information:Lokking at the logs with sip provider, the ccme refuses the call and the error in the sip provider is "busy congestion".Any ideas.
Hi all,I see that my post is very intersting.In the last days I closed the TAC with the solution: do not use dinamicWEP+LEAP on the WLC.I changed the auth type in WPA+CCKM and the situation is chenged radically!No the voice quality is very good an no...
Hi I hope I'm quite near a solution of the original problem.I changed the authentication type to wpa/TKIP + ccmk and It seems working well.Before I was using dinamic WEP with LEAP.Bye
