I have a customer that wants to use the service port interface as a backup entry door to its WLCs in the event of a network failure or misconfiguration. I have configured the WLC's mgt and ap-manager interface in a 10.50.x.x network and the service ...

I am finding conflicting information on Web Portal Guest Authentication. I would like to confirm that the guest username and passwords are encrypted (via https) between the client and the WLC during the redirect to the Virtual interface (1.1.1.1 in ...

Hi,I am ruuning WiSM 4.2 and all APs are running with RRM. What I find is that sonme APs go as low as power 7 when in fact they should go to a min of 4 (the power setting I used for my site survey).Is there a way (gui or cli) to force RRM to a "mini...

I am running a 2 WiSM and WCS on 4.2 and I am getting an error meesage when trying to issue a "Save Config to Flash" command from WCS to all 4 controllers. The message I am getting is "MIB access failed" and I am not able to save the ocnfigs. I als...

I am deploying a 6509-WISM with 120 x 1130 APs running 4.1.181.0. Both controllers (A and B) are configured as LWAPP Layer 3 mode with he same mobility and RF domain. The APs use DHCP to obtain their IP through option 43. All APs register only to ...