Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a question and a issue about this integration.First,the question: Can i use the user data (the AD login and pass)stored in the AD to use in the extension mobility login feature? The Issue: When i select the extension mobility service, the phon...
How (and Where...) can i view and report the CDR calls in the Cisco CallManager? It's also possible when i'm using CCM with a gateway? Is possible to view in CDR the calls that go through the gateway to PSTN, for example?Vitor
Alexandr,The Call Classification field identifies if the Route Pattern will be an off-net or on-net call.It can be used to block certain calls and features when using an off-net number. E.g.: You can block a call transfer to an PSTN number to prevent...
Sebastine,If you need to use the centralized call processing model with Cisco Callmanager, you also need the SRST router into the branch offices. See below at SRND guide:Cisco Unified Communications SRND Based on Cisco Unified Communications Manager ...
Chris,"By contrast, the approach to directory integration adopted by Cisco Unified CM 6.x relies on two separate components to satisfy the user provisioning and user authentication requirements independently. User provisioning is performed with a one...
Mohamed, I'm not sure... Do you have the appropriate phone load for the 7961 model? Or... Did you generate the configuration files from CLI?enableconfigure terminaltelephony-servicecreate cnf-filesend Some excerpt below:Cisco Unified Communications M...
Hello Sunish,Are you using the CiscoIPPhoneImage or CiscoIPPhoneImageFile to accomplish this?In order to display an idle image into the 7970 phone, you need to use the CiscoIPPhoneImageFile XML object, as described below:Cisco Unified IP Phone Servic...
