Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I looked through the documentation but couldn't see if adding multiple destinations under the wireless > Firewall & traffic shaping is possible. The entry box will let me enter them on individual lines but I'm not sure if this is the proper way to do...
I am not an expert in setting up ACLs, but I have a good understanding of the basics. However, I feel like I might be missing something.I have set up a new VLAN to provide direct internet access while blocking communication to other VLANs and on-prem...
You are correct, I found the issue. A rogue device acting as a DHCP server/type of relay gave me the wrong default gateway, but I didn't notice it until now. Once I removed that device I got the correct gateway and traffic is routing properly through...
How would I go about implementing this in my network setup? The only switch I have running layer 3 is the core stack and that is connected via an aggregate link to a layer 2 stack with other layer 2 stacks connected to that. The vendor devices will b...
Im not sure I understand do you want me to ping the gateway for vlan30 on the laptop? The scope for 10.200.16.x is vlan20 and the gateway is 10.200.16.1
