Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a WLC that uses a Windows 2012 radius server and web policy authentication to authenticate users. But, is there a way to configure the session? Example. user1 logons and surfs the web for 5 mim then leaves for a 1hr meeting. When users1 retu...
My config is a Cisco 5508 with 4x1252 LAP. for some reason I'm getting all these errors, not sure when it happen because log has over written. thanks
<134>Cisco_WLC_5508: *sisfSwitcherTask: Mar 04 11:46:49.097: #SISF-6-ENTRY_CHANGED: sisf_shim_uti...
First I'm NOT trying to load balance between 2 ISP.
I have 2 clients, Client A is paying for a 10Mbps link, Client B is paying for a 50Mbps link. What routing commands are need to ensure that all internet traffic from Vlan 10 to send to ISP1 and ...
I have 2 APs in a mesh configuration WITHOUT an WLC. If a wireless client connects with the root AP all vlan traffic is passed. If a wireless client connect to a non-root AP on the native vlan 244 traffic is passed but no other vlan traffic is pass...
thank you for your answer, but the design calls for 802.11a backhaul. you are using 802.11g for backhaul and clients. We need to use 802.11a to bachual all vlans.Thanks
