About Tom Johnson

Tom Johnson · 05-28-2015

I have a Cisco 1841 with FA0/0 and FA0/1. Both are connected to separate networks with different subnets . Each network has its own gateway to the internet. I am trying to configure the 1841 to separate traffic for both subnets so general internet...

Tom Johnson · 05-29-2015

Thank you so much for your help. I have been beating my head on the whiteboard for a long time trying to figure this out. Thanks! have a great weekend.

Tom Johnson · 05-29-2015

that works...PC1 works. How do I get everything on PC1s subnet to work?

Tom Johnson · 05-29-2015

Nothing happened. I don't know what else I need to put in there, so that is probably why. Could you help me with the commands? I am not very Cisco savvy (obviously). Know just enough to be dangerous, but that's how we all start off right. :-)

Tom Johnson · 05-29-2015

I did try your options for #1. There is no command "ip nat enable". Enable is not an option. As for #2 I am unable to do anything with the PC subnets. In digging some more, I found that the 192.168.20.x network is connected to the 10.10.10.1 route...

Tom Johnson · 05-29-2015

Well...head scratcher. I tried changing the ip nat inside/outside like you mentioned. No change. Tried taking them out completely. No change. Took the EIGRP out for the heck of it. No change. So now I am thinking the static routes I put in are...

Member Since	‎05-28-2015 02:36 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	8

User Statistics

User Activity

Cisco 1841 not routing between interfaces

Thank you so much for your

that works...PC1 works. How

Nothing happened. I don't

I did try your options for #1

Well...head scratcher. I