Hi, I am working on a  design that involves Profinet protocol. I have two Couplers connect to IE 4000 switch. Both couples are on two separate VLANs (Let's say VLAN 500 and 501). The couplers should talk to controllers in the same VLAN using Profine...

Hi, I have setup a Cisco ASA 5506 firewall. I wanted to test the VPN access. So I assigned an IP address to my laptop which is on the same subnet as firewall outside interface. I used cisco VPN client and established a connection successfully and rec...

When I check the CPU utilization on my cisco 3750,this is what I see (Following graphs)  I am confused, when I check the processor utilization for 5 min it is less 6% but it jumps up to 90 % in last 72 hours. Is this consider as high CPU utilization ...

Hello,We have a small test network separated by the public internet from a cisco ASA 5506 firewall ( Completely different network from the corporate network with own ISP) There are few test workstations and servers on this test network. I would like ...