About cisco

cisco · 01-13-2012

The network in my building consists of several 2950s connected back to 3550s using redundant fiber links and MST. Recently one tenant decided they wanted to run their own switch and use the existing building network for VoIP only which is on a dedic...

cisco · 06-16-2009

I have a Pix515 and was wondering if there is an easy way to email administratos when an inspect rule is violated. For example one of my ESMTP rules was violated and the following was logged in syslog:%PIX-4-108004: ESMTP Classification: Dropped con...

cisco · 12-26-2008

My device has 256 MB of flash however when I issue the show flash command it appears to be fullSystem CompactFlash directory:File Length Name/status 1 39296912 c3725-adventerprisek9_ivs-mz.124-23.bin 2 900 vlan.dat[256901116 bytes used...

cisco · 12-24-2008

I have a 3725 and was wondering if I could do basic VoIP without Unity or Call Manager? Is it possible to use the router to connect to POTS phone lines but use Cisco IP phones internally? If basic VoIP is possible what features would be available f...

cisco · 06-11-2008

I am running the latest 12.1 IOS on my 6009 and I was wondering if I can configure syslog to tell me when someone logs in or out of the switch? Would I need to change anything with the logging facility (don't think I need to)? Right now I have the ...

cisco · 01-14-2012

I didn't think there would be, but just making sure. So if the client messes up their switch on the VoIP ports would it just take theirs down or mine as well? Let's say they aren't running spanning tree and they connect two ports, could that kill m...

cisco · 07-08-2009

Sorry...I logged in with my work account Ya...that is pointing me in the right direction. Would you know of any sample configs that can point me in the right direction?

cisco · 12-27-2008

It seems that if I boot my IOS from flash then all the space appears to be full, however if I boot from slot0, then both flash and slot0 appear fine. I am wondering it is something with the IOS as when I boot from flash squeeze does not no anything.

cisco · 12-26-2008

Ya...that helps...I haven't looked at the Admin guide yet, but would I need any servers to run CME or does this installed right on the 3725?

cisco · 06-13-2008

I just use the normal password and enable secret. I do not currently use usernames.

Member Since	‎01-25-2008 05:21 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	19

User Statistics

User Activity

Correct spanning tree configuration

email administrators when inspect rules are violated

Flash appears to be full

3725 VoIP question

Syslog configuration on a 6009 (Running IOS)

Correct spanning tree configuration

Re: Two 3750s with HSRP and multiple internet connections

Re: Flash appears to be full

Re: 3725 VoIP question

Re: Syslog configuration on a 6009 (Running IOS)