Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having issue, I have attached my topology diagram. R2 and R4 are ABRs, R5 is ASBR. Area is nssa. The issue is that on R4 I am receiving route Like expected as N2, But on R2 I received route as External routes E2.R2=======6.0.0.0/32 is subnetted,...
====Github link for this application I clone to local enviorment=============https://github.com/CiscoDevNet/Getting-started-with-Cisco-SD-WAN-REST-APIs/blob/master/README.mdHi, I configured SDWAN API. I clone the application from github.The applicati...
I have setup a lab. I have attached diagram and also vMange dashboard where it show vBond is up. But still there is no control connection between vBond to vManage and vBond to vSmart.vmange id: 20.20.20.3vsmart id: 20.20.20.2vbond id: 20.20.20.1vMana...
CUSTOMER SITE NOT ABLE TO PING SITE 2, even routes are advertised properly via mpls bgp. I am pinging using loopback 10.10.10.1 as source from site 1.as you see below 10.10.10.0 network is received on other endPE1 vrd routing table:PE1#sh ip route vr...
Yes Tunnel was up yesterday, then down. After making tunnel interface down and up it is up now. But this things happens quite frequently, means tunnel down and after restarting router or re enabling tunnel it works, we need a solution for this.Please...
isakmp is already enable.but it is not genrating logs for tunnel 20TEST-SITE-MUSHROOM#debug crypto isakmpCrypto ISAKMP debugging is onTEST-SITE-MUSHROOM#Aug 26 2026 10:39:00.908 AST: ISAKMP-ERROR: (0):ignoring request to send delete notify (no ISAKMP...
This is R5 output you asked for. R5#sh ip ospf database self-originateOSPF Router with ID (5.5.5.5) (Process ID 1)Router Link States (Area 51)Link ID ADV Router Age Seq# Checksum Link count5.5.5.5 5.5.5.5 1578 0x80000039 0x00AFA1 5Type-7 AS External ...
