Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a site that is running 4.2.130 with Vocera Badges. Sometimes the AP sends retries and then floods of RTS packets (up to 32) to the Badge. Is there a way to limit the number of retries and CTS packets that get sent out? The default is way to...
Slight correction. If two APs on the same channel can decode each others 802.11 signal, it is not noise. If the signal is degraded such that it cannot be understood, it is noise.
Bruce,We are running at 4.2.x code and I only see CTS-Self. The only time I see RTS-CTS is after the AP retries a packet 8 times. It then follows that up with up to 32 RTSs.-r-
Protection will be enabled if:1) There is a 11b STA associated to an 11g AP2) An 11g AP on the same channel has protection enabled.If your 11g (not in g-only mode) AP is on channel 11 AND you have a neighboring AP that is also on channel 11 that AP i...
The RTS / CTS packets are sent without BSSID info and without to DS / from DS designation (Ad Hoc) so that all devices on channel that can hear the packets will respect the NAV.
