Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Has anyone implemented the Management VPN tunnel in their environment.Documentation is pretty straightforward for the FTD side. However, I haven't found anything that instructs what to do on the Host side to complete this setup.Any help would be high...
We have one client that cannot connect to our IPSEC VPN, but has no problem connecting to SSL VPN.The other difference is IPSEC VPN is configured with DAP, while SSL VPN is not.No other hosts are experiencing the issue.The problem host does not get p...
We are currently sitting at 7.2.11 and want to upgrade to the latest Gold Star Version 7.6.2.Does anyone have experience with upgrading to 7.6.2?Are there any recommendations on how many version steps we should take to get to 7.6.2?
We are conducting regular Operational backups of our ISE nodes.We are also exporting RADIUS and TACACS operational data to a repository before purging.Documentation states that "Operational Data Backup: Contains Monitoring and Troubleshooting data."I...
We are having issues establishing a port-channel between an FTD 3110 and ASR 920. FTD LACP mode is set to "Active" while the ASR is set to "Passive". But it doesn't work.However, we have seen the FTD 4110 with an LACP mode of "On" and ASR "Passive" w...
@Cristian Matei Turns out it is possible that the ASR is actually set to "On" which explains why it works with the 4110s.I don't have access or much knowledge of an ASR, so could you answer the following?If LACP is configured on an interface we shoul...
We are having issues establishing a port-channel between an FTD 3110 and ASR 920. FTD LACP mode is set to "Active" while the ASR is set to "Passive". But it doesn't work.However, we have seen the FTD 4110 with an LACP mode of "On" and ASR "Passive" w...
Dustin this is so helpful. Thank you!!That's a little frustrating. Almost what's the point in having multiple ones.Is there no way to signal NADs to use another Node?
