Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are thinking of setting up a port-channel (with two or four 1gig members) between two CBS220-24T-4GGenerally you want to spread out the port-channel member links over different ASICWhat ASIC numbers map to which ports on the CBS220-24T-4G ?regards...
We are starting to plan around lifecycle upgrade/replacement of CBS350 in the core/distribution to a C1300 based switch (or pair of stacked 1300) based on the EOL noticehttps://www.cisco.com/c/en/us/products/collateral/switches/business-350-series-ma...
There is a new firmware for the Cisco CBS250/350 series, but when I check for updated release notes to help me understand what is resolved or new in the firmware, there is nothing new. Anyone have any insight ? names of new firmware (cbs350 and 250...
We have (4) CBS220 that periodically reboot. At first at thought it was maybe a power issue, but we have confirmed that our UPS units are good and another Cisco switch (CBS250) on the same UPS as one of our CBS220 does not reboot. The CBS220 may...
Curious to know if others are using "qos basic" or "qos advanced" to support voip (Deskphones using voice vlan).I'm trying to see if I can get by with just "qos basic" and "priority-queue out num-of-queues 3" so as to not overly complicate things in ...
I tend to agree with your statement . I also looked at catalyst c9300 and even those (which technically should be "better" than the CBS220 easily) are 1 ASIC only for their C9300-24T and C9300-48Thttps://www.cisco.com/c/en/us/products/collateral/sw...
understood. my issue is the SFP+ that I would like to use to take advantage of that cat6a is the SFP-10G-T-X is NOT supported on C1200 series. so if we choose to upgrade from cbs250 series to c1200 with -4X model (SFP+ uplinks) then we cannot use...
