Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have built a fabric using NDFC with BGWs, how do I extend my L2 VNIs in the fabric to an external network? Can I connect my core in the external network via L3 to the BGW, and configure an overlay network to extend the L2VNI? Does NDFC have automat...
Hi,Hope i have the right forum. I am trying to use nexusascode from github and getting this error when i try terraform init Could not download module "aci" (main.tf:15) source code from│ "git::https://github.com/netascode/terraform-aci-nac-aci?ref=9f...
Hello,I have an external switch connected to a leaf switch using a port channel. The port channel carried Vlan 100,200,300. I have EPGs 100,200 and 300 and tried statically mapping the port channel to each EPG, but is fails saying the port channel al...
Hello,i am trying to register some new phones to CUCME, and they are stuck on registering looking for these filesCUCME#*Dec 24 19:14:06.219: TFTP: Looking for CTLSEP2C01B5E6E361.tlv*Dec 24 19:14:07.599: TFTP: Looking for ITLSEP2C01B5E6E361.tlv*Dec 24...
Hi,I have created a Data Center VXLAN EVPN fabric with different tenants using NDFC. I am trying to leak routes between the shared VRF and other VRFs. NDFC auto generated the route target for each VRFs, I can't see what route target numbers were assi...
Thanks YanL, i have done this myself in the past, but surprised i was running into this problem. The issue was i was selecting Trunk (Native) and not Trunk. This allowed me to map the PC to multiple EPGs with different encaps
I think what i am attempting is not allowed in ACI. You cannot directly map a single port channel to multiple EPGs using different vlan encapsulation. Can someone confirm this. Thanks
Hey Chris,Thanks for the response, the VLANs are in the vlan pool and here is the exact error Error: 400 - Validation failed: Port: topology/pod-1/paths-1000/pathep-[AGGSWITCH-PC] has more than 1 native encap. So i mapped AGGSWITCH-PC to EPG100 with ...
