About ciscodude111

ciscodude111 · 08-25-2011

Dear all,This is a small, but irritating issue. I am trying to do static NAT (PAT) before pushing it into the VPN (IPSEC).However, the nat command yields:Global address overlaps with maskstatic (inside,outside) 195.88.18.249 access-list application_a...

ciscodude111 · 08-24-2011

Dear all,I need some assistance here. I have been trying to fit in the peices, but it doesnt seem to be working.Attached is the ASA configuration. I am trying to add another VPN on the ASA. The customer, I named here Gotham city, would only want publ...

ciscodude111 · 08-23-2011

hello all...I am trying to configure traffic to the wan using the IPSEC fw and NAT. Below is the network diagram:My configuration as suchversion 7.2(4)30interface e0/0nameif outsideip add 195.87.3.250 255.255.255.0security 0no shutinterface e0/1namei...

ciscodude111 · 09-22-2011

Apologies. Actually, that is what i get from the ping.Anyway, forget that. I did some playing around.This is the natnat (inside) 0 access-list no-natnat (outside) 0 access-list 135 outsideglobal (outside) 1 interfacenat (inside) 1 0.0.0.0 0.0.0.0nat ...

ciscodude111 · 09-19-2011

Hi Raga,While waiting for the ping results (its in Europe), i was thinking of other possibilities for this. Below is the NAT from the systemglobal (inside) 3 interfacenat (outside) 3 access-list 125 outsideglobal (outside) 1 interfacenat (inside) 1 0...

ciscodude111 · 09-16-2011

Hello,Alright, here it is...vpn# ICMP echo request from 10.103.4.40 to 10.103.0.250 ID=60532 seq=0 len=40ICMP echo reply from 10.103.0.250 to 10.103.4.40 ID=60532 seq=0 len=40ICMP echo request from 10.103.4.40 to 10.103.0.250 ID=60532 seq=0 len=40ICM...

ciscodude111 · 09-15-2011

Hello Raga,Ok from inside.vpn# ping 173.209.195.20Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to SYNIVERSE_DL_VPN_PEER, timeout is 2 seconds:ICMP echo request from 195.88.18.250 to SYNIVERSE_DL_VPN_PEER ID=4388 seq=33125 len=72ICMP e...

ciscodude111 · 09-14-2011

Hi,Still its not translating.ICMP echo request translating outside:10.103.4.139/1 to outside:195.88.18.250/33835ICMP echo request from outside:10.103.4.139 to outside:SYNIVERSE_SV_VPN_PEER ID=1 seq=20 len=32ICMP echo request translating outside:10.10...

Member Since	‎08-23-2011 01:21 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	22
Total Helpful Votes Received	5

User Statistics

User Activity

NAT not working..

NAT-ing and IPSEC issue

Configuring NAT on IPSEC

NAT-ing and IPSEC issue

NAT-ing and IPSEC issue

NAT-ing and IPSEC issue

Re: NAT-ing and IPSEC issue

NAT-ing and IPSEC issue