I'm not sure there's enough information in your post, but I don't think you can rspan between vrfs in that setup. If a vlan spans the vrf you should be good, but if the intent of the vrfs and asa are to provide separate networks, you may be out of lu...
I have not seen it mentioned, but one of the possible causes for the error is that the file does not exist on the destination tftp server. One of the strange security measures taken by tftp, since there is no login required, is that a file to be upda...
Not sure this will help, but the question would be is the console port not working at all, or only after it gets to the active config and is disabled?If you reset the 501 with a terminal attached to the console port do you see bootup messages, or doe...
Observations, You can identify what mac address is on what port using the 'sh cam' commands. for example if you needed to know what the mac address of the device in port 2/21 is, you can use 'sh cam mthd 2/21' where mthd is any of dynamic, static, p...
It sounds like the time server you are running on the windows box is not formatting replies in a method that the IOS recognizes. If you go through the various RFCs, there are 12 related to either Network Time Protocol (NTP) or Simple Network Time Pro...
