Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having a problem with CiscoWorks server hanging while in use. I am directly connected to Cisco Catalyst 6500 gig port with a gig Indtel nic on the server. Port to Nic duplex speed problems do not appear to exist. The dell 1750 server has a dua...
No that is not correct. I simply build the vpn groups based on the acs groups and allow access to devices based on ACS. The people that belong to our enterprise are passed from ACS to Windows ADS with no problem.
Yes it is working, however I send everyone desiring VPN Access through the Cisco ACS server and define access resttrictions on the network using Network Access Restriction (NAR) groups defined on the ACS server.
In pdm 3.0(1) another command is added that is pdm location that addresses locations where pdm is available from. the mask 255.255.255.255 means only this address and only the inside interface.
The following commands should be issued.http server enablehttp (ip address of workstation pdm is to be used from) 255.255.255.255 insidepdm location (ip address of workstation pdm is to be used from) 255.255.255.255 insideThat hoepfully should get yo...
in your web browser "http://ip address of pix inside interface" or change inside interface to management interface if you have one. I would suggest upgrading the pix OS and PDM two different downloads.
