About mariusferezan

mariusferezan · 09-10-2010

After I formatted the flash I am trying to copy the IOS from tftp server using "copy xmodem: flash:c3550-ipbasek9-mz.122-44.SE6.bin" command, in rommon mode. I am getting the I/O error message.I did try to boot from tftp using the "set BOOT tftp:c355...

mariusferezan · 09-11-2010

I found the issue. I was using TeraTerm and then I switched to HyperTerminal from Windows XP and it worked fine, just like in Cisco documentation. I hope it will work for you as well. On my 3550 I had to set the BAUD at 9600 to work.Good luck.

mariusferezan · 09-11-2010

Charles,You are right, the document provided by Cisco does not help. I did follow the instructions and I am keep getting the I/O error. I have used two computers and I just tried the same thing on my 2950 last night....erased the flash, follow the st...

mariusferezan · 09-11-2010

Yes I did.Thank you.

mariusferezan · 07-07-2010

Hello Ganesh,Isn't 192.168.0.0 - 192.168.255.255 a range of private IP addresses? Then how come the range of IP that you are showing in that example is all the way up to 198.191.255.254 if the CIDR is /10? The first octet can not change. The broadcas...

Member Since	‎07-07-2010 01:12 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5
Total Helpful Votes Received	5

User Statistics

User Activity

Xmodem I/O error when copy IOS from tftp server

Re: Xmodem I/O error when copy IOS from tftp server

Re: Xmodem I/O error when copy IOS from tftp server

Re: Xmodem I/O error when copy IOS from tftp server

Re: How to find Default Subnet mask for 192.168.10.7/10?