Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Using webvpn on a 2811 w/ adv ent 12.4(20)THTTP sites work fine (in the url-list)But when we try to use an HTTPS site, clicking on that site just hangs forever. Debugs show the connection is making it, and the servers are getting the connections....
Hi,I have two 1841's with a vpn between themOne 1841 has a lot of other misc vpns terminated there, and they all work fine. The other 1841, has only this one vpn.Packets over 300 bytes are getting dropped or something is happening (proven by pings -...
Hi,Does anyone have any reasons why a 2811 should _not_ be used as both a low traffic (5-15 concurrent calls max) SIP/PRI gateway and a VPN gateway (for about 10 VPNs, up to 5mbps traffic total) at the same time?768megs of ram, adv ip services 12.4(2...
Hi,Does anyone have any reasons why a 2811 should _not_ be used as both a low traffic (5-15 concurrent calls max) SIP/PRI gateway and a VPN gateway (for about 10 VPNs, up to 5mbps traffic) at the same time?768megs of ram, adv ip services 12.4(22)T
Hi,We have a 2811 with:1 ISDN PRI4 FXS ports3 SIP Peers (asterisk)Calls are working fine, calls come in from the PRI and from SIP peers and get routed to the FXS portsHowever, when all 4 FXS ports are busy, the 2811 is returning a Congestion on the P...
While waiting to get the smartnet situation straightened out, I tried using a GRE tunnel instead, with checksumming enabled...And everything works! But now my fa0/0 is racking up hundreds of CRC errorsDoesn't IPsec do checksumming? Why does GRE catc...
MTU is left at default, 1500. Only one interface in use, as a vlan trunk. pre-encryption fragmentation, no df-bit settingsThe other site (the other end of the VPN) is the exact same setup -- Cisco 1841 handling VPN, juniper firewall, but the other ...
Yeah, that's the next step, once we get the contract situation straightened out (TAC says it is on another company's contract)Any other suggestions? Could it be memory related? Is there any way I can test the memory or move what part of the memory ...
