Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear everyone!,
My switch is 2960X cannot start after I config wrong and loop reboot everytime. I was download new IOS: c2960x-universalk9-mz.152-2.E6.bin but nothing change. Everyone help me pls!
Connecting to COM6...Connected.
Err: Interrupt: Mach...
Dear everyone,
I have problem witch install firewall asa 5525X, version IOS sfr 5.3.1, version firesight management 5.4.0. I was add firepower sfr to firesight management done, but cannot show any data or traffic from firesight,
critical: Critical ...
Hi johnlloyd_13
switch: flash_initInitializing Flash......The flash is already initialized.
i was boot to c2960x-universalk9-mz.150-2.EX5 or c2960x-universalk9-mz.152-2.E6.bin but switch still reboot loop:
entry point: Err: Interrupt: Machine check ...
Hi jwornstaff
You must sure traffic throught from inside to outside (nat, access list permit from inside to outside). After put a laptop test ping or access internet from inside. traffic will show in dashboards.
thanks
Hi Aastha Bhardwaj
I was config the config:
ciscoasa(config)# access-list sfr_redirect extended permit ip any any
ciscoasa(config)# class-map sfrciscoasa(config-cmap)# match access-list sfr_redirectciscoasa(config)# policy-map global_policyciscoasa(...
