Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a few questions and would really appreciate your insight: 1. IPsec NAT trasperancy allows compatibility b/w NAT and IPsec...is it only for client to router and client to PIX? what about router to router if they have a nat device inbetween? 2. ...
I have a few questions and would really appreciate your insight:1. IPsec NAT trasperancy allows compatibility b/w NAT and IPsec...is it only for client to router and client to PIX? what about router to router if they have a nat device inbetween?2. An...
I have several remote sites that have a pix 506e that connect to the headquarters office to a vpn 3030 concentrator. Currently we are using 3des encryption. I'd like to use AES 256. Do you have any sample configs using aes 256 from the pix point ...
Hi,The problem is that the VIPs processes the packets locally on the VIP processor. The crypto engine only runs on the RSP. There is no way for the 2 processors to talk.How do I disablea VIP2-40 or 50, disable the VIP?I tried this command:7500-gw(con...
My user connects to a PIX with a Vpn client with stateful firewall ON(checked)In this case no one else from outside can access anything on his laptopNow he goes for a vacation and accesses Internet through that Laptop, someone installs a worm/some ot...
Hi,Enter them manually in hexadecimal format.This is an arbitrary hexadecimal string of 8, 16, or 20 bytes.If the crypto map's transform set includes a DES algorithm, specify at least 8 bytes per key.If the crypto map's transform set includes an MD5 ...
It doesn't stay in effect ,CPP policy is for only internet traffic..not for tunnel traffic...it is pushed when vpn client connects to concentartor.once session drops ...we loose all policies.ThanksAtul.
VPDN does not support that command, use the following workaround instead:Here is the procedure you can follow to enable split-tunneling for PPTP clients, the same procedure has to be followed everytime the PPTP client connects as it is a work-around ...
