Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Device Model: Cisco ASA 5585-ssp-20Software Version: 9.12(4)55ROMMON Version: 2.0(13)We have encountered a problem on Cisco ASA. After power off or reboot the device does not boot from disk0, goes to ROMMON and cannot find the software image. At the ...
We are experiencing unstable connectivity between endpoint devices and Cisco ISE. Random disconnections occur at unpredictable times, and standard troubleshooting methods (shut/no shut, removing port-security) do not resolve the issue. The only tempo...
Hello,We are running two FRP2120 devices configured in an Active/Active HA pair with ASA OS version 9.10, operating in multi-context mode. Our goal is to upgrade the ASA software to version 9.20. However, we encountered an issue: we cannot access the...
No network problems,If I understand the meaning of the word NAD correctly, we are using Cat9300 for user connectionCommunication with the radius server is available. The problem is solved by removing the ISE configuration from the port
Hi Marvin,Thank you for your help!I have successfully completed the re-imaging, HA restoration, and version upgrade. Cisco TAC provided the 9.10.1 image.
Hi Marvin,Thank you for your reply.I need to know, will the HA pair be formed if, after upgrading the secondary node, I install another software version?Currently, the Primary node is running on ASA 9.10, and after reimaging, I will install version 9...
