Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I'll have a problem to configure VPN Ipsec l2l between my CISCO ASA 5510 with HA and a remote lan configured with 2 cisco router with HSRP on lan.I'll configure a static crypto map with the definition of the two peer (master and backup).Sometimes ...
Hi, I've a problem with a pix 501. The ethernet 1 port probabily have an hardware problem, because even if I put a cable in one of the four interface the link is always down. I've upgrade the unit to firmware 6.3(5) version but without result. How ca...
Hi how Julio said I have the HSRP only on the router on the LAN side.My ASA configuration is the followingaccess-list aclVpn extended permit ip 172.20.0.0 255.255.0.0 172.16.10.0 255.255.255.0access-list nonat extended permit ip 172.20.0.0 255.255.0....
When I Plug a cable in any of the 4 switch RJ45 port nothing happens. The sh int tell me "link protocol is down" and the led is off. I'll set a pc port to 100full (instead of auto) but nothing happens. I'll try straight and cross cable.If I try the s...
