Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Problem On an SVI I remove the inbound ACL and it works fine here is my inbound ACL The L3 switch is acting as the DHCP server as well I have included the DHCP commands as well. I have tried every permit I can think of from host 0.0.0.0 to host 224....
I am trying to set up ACL's between Vlans on a the SVI interfaces in a 3550. under normal circustances I think they are the opposite of regulat interface ACL's as far as incoming is actually incoming of the packet into the SVI but outgoing is not out...
We are looking at replacing our current 6509 which is viewed as a single point of failure with an gigastacked cluster of 3550 Gigastacked or 3750 Switch Stack cluster, or similar group of switches..Price is the main issue as we can build the entire s...
We are looking at replacing our current 6509 which is viewed as a single point of failure with an gigastack of 3550 or similar group of switched..looking at 3550-12G with gigstacks connecting each. Price is the main issue as we can build the entire s...
Heres thr problem I am having 3550 12G happens in multiple versions i just upgraded to the following again and no helpSystem image file is "flash:c3550-i5q3l2-mz.122-25.SE/c3550-i5q3l2-mz.122-25.SE.bin"when i try to add or change a vlan beyond the c...
Still no resolution.. why does the ACL fail DHCP when applied. I have allowed everything I can think ofinterface Vlan645 description Scarlett Vlan ip address 10.96.20.1 255.255.255.192 ip access-group Scarlettin in no ip unreachablesno ip access-list...
Here is the entire config this is on a 3550-12G but i have the same issue on any 3550. I have removed the other ACLs from the configversion 12.1no service padservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetim...
Still nogo I have added every concievable allow I can think of to isolate this. Nothing.. Is this an issue with this being an SVI vs an actual DHCP server once again the second I remove the ACL all is working. permit udp 10.96.20.0 0.0.0.63 host 10.9...
